VIVO Release 1 v1.2 Upgrade Guide

January 28, 2011 - Upgrading from Release 1 v1.1 to Release 1 v1.2
Missing pieces and fixes

This document provides a short description of the steps involved in upgrading your installation of VIVO from Release 1, Version 1.1 to Version 1.2. This and other documentation can be found on the support page at VIVOweb.org

If you need to do a fresh install, please consult VIVO Release 1 v1.2 Installation Guide or the install.html file located in the doc directoy of the VIVO source code distribution.

Release anouncement for V1.2

Text from the wiki page

Upgrade process for V1.2

  1. Before Performing the Upgrade
  2. The Upgrade Process
  3. Ontology Upgrade
    1. Verify Ontology upgrade process
    2. Ontology knowledge base manual review
  4. Theme Modifications

I. Before Performing the Upgrade

Please ensure that backups are created of the:

The upgrade process is similar to the original install process with the following EXCEPTIONS:

The Upgrade Process

1. Download the new distribution file and unpack it into a new source directory.

2. Create deploy.properties, using the same values as in your previous installation and set values for the new variables. The following table shows the default properties for deploy.properties with new V1.2 properties in blue.

Property Name Example Value
Default namespace: VIVO installations make their RDF resources available for harvest using linked data. Requests for RDF resource URIs redirect to HTML or RDF representations as specified by the client. To make this possible, VIVO's default namespace must have certain structure and begin with the public web address of the VIVO installation. For example, if the web address of a VIVO installation is "http://vivo.example.edu/" the default namespace must be set to "http://vivo.example.edu/individual/" in order to support linked data. Similarly, if VIVO is installed at "http://www.example.edu/vivo" the default namespace must be set to "http://www.example.edu/vivo/individual/"

* The namespace must end with "individual/" (including the trailing slash).
Vitro.defaultNamespace http://vivo.mydomain.edu/individual/
Directory where Vitro code is located. In most deployments, this is set to ./vitro-core, but it commonly points elsewhere during development.
vitro.core.dir ./vitro-core
Directory where tomcat is installed.
tomcat.home /usr/local/tomcat
Name of your VIVO application.
webapp.name vivo
Directory where uploaded files will be stored. You must create this directory ahead of time.
upload.directory /usr/local/vivo/data/uploads
Directory where the Lucene search index will be built. Depending on your permissions and who Tomcat is running as, you may need to create this directory ahead of time.
LuceneSetup.indexDir /usr/local/vivo/data/luceneIndex
Specify an SMTP host that the form will use for sending e-mail (Optional). If this is left blank, the contact form will be hidden and disabled.
Vitro.smtpHost smtp.servername.edu
Specify the JDBC URL of your database. Change the end of theURL to reflect your database name (if it is not "vivo").
VitroConnection.DataSource.url jdbc:mysql://localhost/vivo
Change the username to match the authorized user you created in MySQL.
VitroConnection.DataSource.username username
Change the password to match the password you created in MySQL.
VitroConnection.DataSource.password password
Specify the Jena triple store technology to use. SDB is Jena's SPARQL database; this setting allows RDF data to scale beyond the limits of the JVM heap. Set to RDB to use the older Jena RDB store with in-memory caching.
VitroConnection.DataSource.tripleStoreType SDB
Specify the maximum number of active connections in the database connection pool to support the anticipated number of concurrent page requests. It is not necessary to adjust this value when using the RDB configuration.
VitroConnection.DataSource.pool.maxActive 40
Specify the maximum number of database connections that will be allowed to remain idle in the connection pool. Default is 25% of the maximum number of active connections.
VitroConnection.DataSource.pool.maxIdle 10
Change the dbtype setting to use a database other than MySQL. Otherwise, leave this value unchanged. Possible values are DB2, derby, HSQLDB, H2, MySQL, Oracle, PostgreSQL, and SQLServer. Refer to http://openjena.org/wiki/SDB/Databases_Supported for additional information.
VitroConnection.DataSource.dbtype MySQL
Specify a driver class name to use a database other than MySQL. Otherwise, leave this value unchanged. This JAR file for this driver must be added to the the webapp/lib directory within the vitro.core.dir specified above.
VitroConnection.DataSource.driver com.mysql.jdbc.Driver
Change the validation query used to test database connections only if necessary to use a database other than MySQL. Otherwise, leave this value unchanged.
VitroConnection.DataSource.validationQuery SELECT 1
Specify the name of your first admin user for the VIVO application. This user will have an initial temporary password of 'defaultAdmin'. You will be prompted to create a new password on first login.
initialAdminUser defaultAdmin
The name of a property that can be used to associate an Individual with a user account. When a user logs in with a name that matches the value of this property, the user will be authorized to editthat Individual.
selfEditing.idMatchingProperty http://vivo.mydomain.edu/ns#networkId
Temporal Graph Visualization is used to compare different organizations/people within an organization on different parameters like number of publications, grants. This parameter will be used as a default in case a URI is not provided. It will be also used whenever this visualization is to be rendered for top level organization. In absence of this parameter a SPARQL query will be fired which will attempt to provide a top level organization. The name of a property that can be used to associate an Individual with a user account. When a user logs in with a name that matches the value of this property, the user will be authorized to edit that Individual.
visualization.topLevelOrg http://vivo-trunk.indiana.edu/individual/topLevelOrgURI

3. Apply any previous changes you have made to the new source directory.

Special notes regarding source files

4. If you had modified web.xml to configure the Pellet Reasoner (as described in the installation instructions), repeat that modification.

5. Stop Apache Tomcat and run ant by typing: ant all

6. Start Apache Tomcat and log in to VIVO.

III. Ontology Changes

A. Verify Ontology upgrade process

After Apache Tomcat is started, these files should be reviewed to verify that the automated upgrade process was executed successfully.  The ontology alignment process will create the following files in the Tomcat webapps/vivo/WEB-INF directory:

ontologies/update/logs/knowledgeBaseUpdate.log
A log of a summary of updates that were made to the knowledge base and notes about some recommended manual reviews. This file should end with "Successfully finished processing ontology changes".
ontologies/update/logs/knowledgeBaseUpdate.error.log
A log of errors that were encountered during the upgrade process. This file should be empty if the upgrade was successful.
ontologies/update/changedData/removedData.n3
An N3 file containing all the statements that were removed from the knowledge base.
ontologies/update/changedData/addedData.n3
An N3 file containing all the statements that were added to the knowledge base.

B. Ontology knowledge base manual review

Changes to the VIVO core ontology may require corresponding modifications of the knowledge base instance data and local ontology extensions.

When Apache Tomcat starts up following the upgrade, it will initiate a process to examine the knowledge base and apply necessary changes. Not all of the modifications that may be required can be automated, so manual review of the knowledge base is recommended after the automated upgrade process. The automated process will make only the following types of changes:

Class or Property renaming
All references to the class (in the subject or object position) will be updated to the new name. References to the property will be updated to the new name.
Class or Property deletion
All individuals in a deleted class will be removed.
All statements using a deleted property will be changed to use the nearest available superproperty. If there is no available superproperty then the statement will be deleted from the knowledge base. Note that all removed and added data is recorded in the files in the changedData directory.
Property addition
If a newly added property is the inverse of a previously existing property, the inverse of any statements using the pre-existing property will be asserted.
Annotation property default values
If a site has modified the value of a vitro annotation (such as displayRankAnnot or displayLimitAnnot) so that it is no longer using the default, then that setting will be left unchanged.
If a site is using the default value of a vitro annotation, and the default has been changed in the new version of the ontology, then the new default value will be propagated to the knowledge base.

IV. Theme Changes

VIVO 1.2 comes with a new theme called "wilma" that uses the FreeMarker template engine for generating web pages. The theme is located in /vivo/themes/wilma and the FreeMarker files have an ftl (for FreeMarker Template Language) extension.

Follow step A or B below, whichever is applicable to your site:

A. If you did not create a customized theme for your site in V1.0 or V1.1, but used the vivo-basic theme in its original directory, you need not take any action in order to convert your site to the VIVO 1.1 theme.

I THINK THIS SECTION NEEDS MAJOR CHANGING AND I NEED HELP WITH IT, Por Favor

B. If you created your own theme directory in VIVO 1.1, follow the steps below under sections "Templates," "Stylesheets," and "Site Icons" to upgrade your theme to VIVO 1.2.

1. Templates
a. Copy the directory /vivo/themes/vivo-basic/templates into your theme directory /vivo/themes/[your-theme-name].
b. Follow step i or ii below, whichever is applicable to your theme.
  1. If you did not apply any customizations to the JSPs in your VIVO 1.0 theme, then you do not need to apply any additional changes to the VIVO 1.1 theme templates during the upgrade process.

  2. If you did apply customizations to the JSPs in your VIVO 1.0 theme,you will need to hand-replicate those modifications in the new theme template files.

    The theme template content that was previously contained in three JSP files is now contained in five FTL files. The correspondence between the 1.0 JSPs and the 1.1 FTLs is as follows: 

                identity.jsp => identity.ftl
            menu.jsp => menu.ftl and search.ftl
            footer.jsp => footer.ftl and googleAnalytics.ftl

    googleAnalytics.ftl is the file to which you add your site's Google Analytics Tracking Code (see section II).

    Because the FreeMarker Template Language uses many syntactic conventions that will be familiar to template authors from JSP or other common templating systems, the translation of your JSP changes into the new FTLs should be relatively straightforward.

    Consult the FreeMarker Template Author's Guide at http://freemarker.org/docs/dgui.html and the Reference at http://freemarker.org/docs/ref.html for complete documentation of the syntax and available built-in constructs. Template authors need not be concerned with the Programmer's Guide or Java API documentation.

c. Remove the jsp directory from your themes directory.
2. Stylesheets
VIVO 1.1 includes changes to vivo-basic stylesheets. If you modified styles in your VIVO 1.0 theme, you will not be able to simply copy the 1.0 stylesheets into your 1.1 theme, because you will then lose 1.1 style upgrades that your theme should pick up. Instead, you should use the vivo-basic 1.1 stylesheets as a starting point, and manually merge your 1.0 style modifications in as needed.
3. Site Icons
Copy the site icons from your 1.1 theme into the site_icons folder in your 1.2 theme.